Modeka 3in1 adventure motorcycle pants Talisms - completely elastic for every figure
CE certified according to prEN 17092-3: 2019
The stretch highlight: the new 3in1 adventure pants with elastic super powers
fit
Modeka Touring Stretch-Fit: 3in1
application
5 - 35 ° C, on- and off-road
protection
outer fabric
elastic, technical & abrasion-resistant stretch material with woven DuPont (™) Aramid (R) (83% polyamide, 12% aramid, 5% elastane)
Material doubling at the crash points
Leather in the inner knee area
high quality coated DuPont TM Aramid ® on the lower inner leg
Anti-slip zone on the buttocks made of leather
protectors
Knees: SAS-TEC protectors certified according to EN 1621-1: 2012 (Level 2)
The knee protectors are adjustable in two levels
Hip: SAS-TEC protectors CE certified according to EN 1621-2: 2012 (Level 1)
Weather
removable Sympatex ® membrane: 100% waterproof, windproof; dynamic climate regulating and breathable
removable thermal lining
adjustability
adjustable in width with flexible Velcro in the waistband
adjustable in width with Velcro at the end of the trousers
Above and below the knee protector, adjustable in width in the rear trousers with a push button
removable length-adjustable braces
visibility
3M TM Scotchlite TM retroreflective material: graphic elements and Modeka logo
Other features
Modeka Standard All around double connection zipper Connection zipper (short and long)
Comfort
Ventilation: The material is generally breathable due to its elasticity
Modeka flow ventilation from front to back:
Air Draft:
2 hinged ventilation flaps positioned on the front thigh
Air Vent:
2 ventilation zips behind the thigh
Pockets: 4
2 waterproof patch pockets with flap, Velcro and push button on the outside
thigh
2 non-waterproof slanted pockets with zip
stretch
complete material is elastic: adapts perfectly to every figure.
additional accordion stretch panels over the knee protector
additional accordion stretch inserts in the waistband
Other features
high waist in the back, equipped with 3D mesh for comfort and ventilation
material
Outer fabric: 83% polyamide, 12% Aramid, 5% elastane
Lining: 100% polyester
Sympatex ® membrane: 100% polyurethane laminated
Membrane carrier: 100% polyester
Thermo pants: 100% polyester
The special features of the Sympatex motorcycle pants Talismen by Modeka
Sympatex®The Sympatex® membrane consists of a copolymer of polyester (water-repellent effect) and polyether (water vapor-permeable effect). The weight is approx. 30 g per jacket or 2 g per shoe. No water can penetrate from outside (water column:> 45,000 mm), but water vapor molecules are conducted physically and chemically through the membrane from the inside to the outside. The advantage: Since there are no pores, they cannot be added due to detergent residues or salt crystals. Accordingly, the breathability remains in the long term.
The Sympatex® membrane is a closed hydrophilic polyester membrane, which means that it has no pores. The membrane is only 1/100 mm thin, transparent and slightly opaque, 100% waterproof, 100% windproof and optimally breathable. This gives the wearer total independence from the weather - at every opportunity. The Sympatex® membrane is 100% recyclable. It consists of harmless polyetherester and is therefore absolutely environmentally friendly.
DuPont ™ Aramid®
The DuPont ™ Aramid® material combines strength with light weight. Aramid® is woven from aramid and nylon fibers. The extremely abrasion and tear resistant material is five times stronger than steel with the same weight. Thus, the use of Aramid® is excellently suitable for motorcycle clothing and is mainly used at crash sites. Modeka also uses Aramid® on some textile pants as protection from the exhaust.
SAS-TEC®
Protectors with highest shock absorption values and best wearing comfort,
Joint protectors meet EN-1621-1: 2012, the back protectors EN 1621-2: 2014.
Dimensionally stable with memory effect: After external forces, the foam returns to its original shape after a short time.
Multi-impact: In contrast to many other damping materials, the foams from SAS-TEC are multi-impact. That means: the protectors are reusable after a fall.
Lightweight: The density of the SAS-TEC foam is around 280 g / l, hard shell protectors weigh around 1050 g / l.
Adapted damping behavior: The air trapped in the cells of the foam causes progressive damping. The damping performance increases proportionally with the forces acting at high speed.
Environmentally friendly: The raw material for foam production is partly made from renewable raw materials. The protectors can be easily disposed of with household waste.
Long lifespan: Some protector manufacturers only state a lifespan of two to three years for their products - the lifespan of the SAS-TEC foam is around ten years.
Temperature resistant: Thanks to a special mixture, SAS-TEC foam is temperature resistant up to 100 degrees Celsius.
Best wearing comfort: due to the high elasticity of movement of the foam
Hand washable: The water absorption is below 1%, the protectors can therefore be washed by hand without hesitation.
3M Scotchlite ™
At dusk and in the dark, 3M Scotchlite ™ significantly improves the visibility of motorcyclists. Scotchlite ™ reflective materials have an open, very wide-angle reflective system made of catadioptric glass balls. Other reflective materials, due to their structure, require direct light to function. Scotchlite ™ emits light, even if it does not hit directly, brilliantly white and concentrated back to the light source. Silver Scotchlite ™ exceeds even the highest European norms for simulated heavy rains.
